The Compact 2.5 is the first compact oil separator that separated the oil from the liquid in motion in real time. No special procedures are required for operation, as the separator is self-priming and self-levelling. The Compact 2.5 oil separator suctions the liquid from the tank with a double effect diaphragm pump resistant up to 60 C° with adjustable flow rate from 100 to 300 l/h. Via a Venturi-effect self-levelling system with surface skimming, it suctions the oil on the surface through a cartridge pre-filter to capture the floating solids. The pre-filtered liquid then drops into an oil separator tank, where the oil drops, rising to the surface layer, are separated. The liquid, separated from the oil, drops into the degreasing or pickling tank by gravity, promoting the natural flow of the surface oil towards the take-up point.
Oil separator
COMPACT 2.5
Oil separator
COMPACT 2.5
DOWNLOAD PDF
MECHANICAL MARKET
Oil water separator and processing oil
Compact 2.5 oil separator
WITH VENTURI-EFFECT DYNAMIC VARIABLE FLOAT MADE FROM SHOT-BLASTED AISI 316 STAINLESS STEEL
Multiple advantages
Feet or castors
Adjustable feet or castors with brake
Stainless steel
Made from shot-blast AISI 316-L stainless steel
Pre-filter
Cartridge pre-filter with pump protection
Filter
Labyrinth oil separation filter with large contact surface
Feed
Compressed air feed, maximum 7 bar
Take-up
Take-up with dual-action diaphragm pump, air consumption 70-100-NL
Flow rate
Adjustable flow rate, 100 to 300 l/h