Concentrated detergent to be added to the water suitable for cleaning systems operating with emulsifiable cutting oils such as single machine tools or with centralized systems
Product available in 20 liter pack
Consult our technical office for an optimal application through our production offline systems
Unopol A 200
Properties
- HIGH CLEANING POWER
- LOW TENDENCY TO FOAM FORMATION
- IMPROVES SLIDING BEHAVIOUR OF THE WIRE
Cleaning by emulsions
Properties
- HIGH CLEANING POWER
- LOW TENDENCY TO FOAM FORMATION
- IMPROVES SLIDING BEHAVIOUR OF THE WIRE
Instructions for use
Quantity
In case of overdosing or unfavourable circumstances BECHEM Unopol A 200 can lead to foam formation. For this reason the required total quantity BECHEM Unopol A 200 should be added gradually at intervals of 30 to 60 minutes. Foam behaviour has to be checked regularly.
How to use it
BECHEM Unopol A 200 should always be added to the metal working fluid at a point of high turbulence.
Service concentration
The service concentration of 0,1 – 1,0 % should be discussed with the Technical Service of CARL BECHEM GMBH prior to first use.
Dosing amount
The exact dosing amount varies and is determined by the specific condition of the metal working fluid.
Storage
Container to be stored under dry and frost-protected conditions. Temperature range +5 °C to +50 °C
Application examples
Reduce tension
Reduces surface tension of rod, medium and fine drawing emulsions
Stabilizes
Stabilizes metal working and drawing emulsions
Sunroofs
Sunroofs
Seat
Seat adjustment systems
Steering
Lock steering